-40%
boxtech Aquarium Heater, 50W/100W/300W Explosion Proof Submersible Thermostat
$ 15.83
- Description
- Size Guide
Description
Frequently Asked QuestionsQ:Why does the heater have yellow spots or loose quartz?
A:
The above phenomena do not affect the use of the heater,
The reason for the yellow spots is that the milky white quartz tube of the heater is heated.
Quartz is loose due to expansion and contraction by heat.
Q:Why is the temperature control inaccurate after using the heater for a period of time?
A:
Affected by cold weather, the heater will produce scale when working in the water for a long time, and the scale attached to the heater will affect the temperature sensing system of the heater and cause the heater temperature to be inaccurate.
Therefore, we have recommended users to clean the heater's scale regularly
Q:Why is the heater required to be installed vertical where the water flows?
A:
First, the water in each part of the water tank flows through the heater, so that the heater quickly detects the water temperature of the entire water tank and automatically adjusts it to the set temperature
Second, the water flow continuously impacts the heater, which makes the temperature of the heater diffuse faster, and avoids the heating rod from scalding the fish due to the high temperature.
Boxtech Aquarium Heater
Pros:
No having the controls on the heater element is great, no worries of them getting gummed up.
Good controls! I don't notice more than .5 degree in temp swing throughout the day.
Looks good and hides well.
Notice Please:
Temperature Control: Design with External Temperature Controller, Temperature Range is 68ºF-90ºF, when water temperature achieve the setting temperature, heater will automatically stop heating, when water temperature is lower than the setting temperature, heater will automatically start heating.
Electronic temperature control heater
Specifications
Voltage:110 V Frequency: 50HZ
Led Indicator Light:When it working, the indicator light is red.
Temperature Range: 68℉-90℉ Temp exactness:±1
Maximum depth:Aquarium Heater Max deep water immersion 50 CM
Before you clean the aquarium or change water, pls must cut off the heater power, after 10 minute cooling then take out the heater.
Aquarium Heater Submersible:
Double-loop circuit design, the water temperature sensor is installed in the IC circuit to prevent air burning and heating over temperature.
Temperature control is accurate adjustable.
How to use?
Place the heating rod in a place where the water is fluid and fix the suction cup on the cylinder wall.
Connect the power plug of the temperature controller.
Adjust the control knob on the temperature controller to the desired temperature to complete the setting.
Kindly Notices:
The suitable water temperature for tropical fish is 77 ℉ to 82.5 ℉
Before you clean the aquarium or change water, pls must cut off the heater power, after 10 minute cooling then take out the heater,
Clean the scale of the heater regularly