Bridged Converted Pvs7 Binocular PRE ORDER (Pvs31) Gen 3 GP Night Vision Goggles

Description

Night vision is the best superpower
and this most affordable quality Gen 3 Night vision goggle possible!
I use pvs-7 (mx-10130) tubes and put it into a brand new housing then ship it directly to your doorstep.
Advantages:
Dual tube night vision goggles offer a more natural view, improved peripheral vision, and heightened awareness in the dark, helping in tasks like navigation and enhancing overall situational awareness. I'm offering a much more affordable way to get a quality binocular than buying something like the traditional expensive goggle while offering better quality than similarly priced options
(See other NV solutions listed to, ,360 shipped if pre paid through PayPal message for details )
Specs & features
Tube min specs: 64 resolution (lp/mm),
21 S/N, gain 40,000-70,000, Halo 1.25mm
(Keep in mind specs are only noticeable in a lab) I will match tubes so that they have similar specs.
Blemishes: Tubes may have a couple of very small blemishes nothing will be bad or distracting and this includes no emission points or Z1 blemishes
I can get a picture of your specific tubes before I ship it out if requested. Green phosphor tubes.
Size: 160x56x76mm
FOV: 40 degrees
Magnification: 1x
Weight: 1.3lb/620g (no battery)
Battery type: 2x Cr123a
Run time: 75 hours per pod
Auto brightness control: Yes
Bright light cut off: Yes
Auto gated: Yes
Gain: Automatic
Diopter adjustment: +5 / -5 degrees
Dual IR Illuminators: Yes
Focus range: 9.8in / 0.25m to infinity
Eye relief: 0.75in / 19mm
Focus range: 9.8in / 0.25m to infinity
Eye relief distance: 25mm (degree of deviation if your nearsighted or farsighted)
Focus type: manual
Storage: Hard or soft case default is the soft case.
Parts I buy for the build
- D-D2041 housing
- 2x MX-10130 image intensifier
- 2x PA12 MFJ 3D printed adapter rings for image inverters
- soldering material
- positive and negative Wires
Please keep in mind that this is a Pre order. I buy parts on an order to order basis and may take up to 15 to arrive to you. I Will Keep In Contact With You Throughout The build Process.
Mounting options:
All new units will come with a standard tripod mount tapped into one of the mini mounts which allows any standard mount. You will still be able to use the OEM mini rail mounts. Mini rail mounts listed below:
Mini rail Mounting options:
(Flir/mum-14 style mount)
- Armasight Helmet Mount #170 Shroud
- AGM G50S Shroud
- AGM G50MP for MICH
- ATN Universal Helmet Mount Kit ACMNODINHMNT
Thank you for your time, Please reach out with any questions! ,360 shipped if pre paid through PayPal message for details
Not accepting returns at this time, I can offer a separate repair service if you need it.
ITAR restrictions apply will not ship outside the lower 48 states of the U.S.A.