NVG Norotos Universal Shroud (3-hole / 1-hole)

Description

NVG Norotos Universal Shroud (3-hole / 1-hole)
Condition: New; No Box or Tags
Includes Shroud, Single Screw (for 1-hole mounting), Three Screws (for 3-hole mounting)
Compatible with nearly all helmets in use by the DOD (including, but not limited to MICH/ACH, CVC, PASGT, FAST, PRO-TECH, A-Alpha) and will hard mount to those drilled for either the standard single hole or three hole patterns. Non-drilled helmets are not a problem because the Universal Shroud can be coupled with the optional Norotos Strap Assembly (not included).
The Norotos Universal Shroud helps to reduce goggle-to-helmet wobble with its built-in Advanced Stability Management System. Starting with the back side of the shroud, an affixed gasket runs the perimeter of the unit’s unique curvature and creates a compression effect when the shroud is tightened down to the helmet. It also helps the shroud adapt to the slight changes in surface geometry between helmet designs and shell sizes. The front face of the shroud has four high endurance rubber shock absorbers that compress between the shroud and NVG mount. A specially designed tether plug on the shroud surface allows the operator to affix a length of 550 cord between the NVG optic and the shroud. This important feature helps insure the retention of valuable equipment if it becomes disengaged during a drama. The plug can be freed from the shroud under high pressure for individual safety or storage of an NVG.
Interfaces with the standard issue USGI Rhino Arm mounting bracket and Wilcox G24/G22 mounts. Other mounts can be adapted to fit using Norotos-manufactured Shroud-to-Bracket kits.
Export of Norotos products is controlled by the U.S. Department of Commerce under Export Administration Regulations (EAR) and the U.S. Department of State, Directorate of Defense Trade Controls Bureau of Political-Military Affairs, in accordance with 22 U.S.C. 2778-2780 of the Arms Export Control Act (AECA) and the International Traffic in Arms Regulations (ITAR). (22 CFR Parts 120-130) regulate Wilcox products.
It is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person, whether abroad or within the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.
Item can NOT be shipped outside of the U.S. Buyer must be a U.S. Citizen or Permanent Resident and not export the item outside of the U.S.