Pvs-7 Tube Converted Monocular PRE ORDER (Pvs-14) Gen 3 Night Vision PRE ORDER

Description

Night vision is the best super power
and this is the most affordable quality Gen 3 Night vision possible!
I use a New old stock pvs-7 (mx-10130) tube and put it into a brand new housing then ship it directly to your doorstep.
Advantages:
Monoculars are light and small, making them comfortable for long activities like hunting or wildlife watching. They keep your peripheral vision and natural night vision in the other eye improving FOV. It’s tough and well built. I'm offering a quality and more affordable way to get a monocular than something like a pvs-14.
(See other NV solutions to, ,680 shipped if pre paid through PayPal message for details)
Specs & features
Tube min specs: 64 resolution (lp/mm),
21 S/N, gain 40,000-70,000, Halo 1.25mm
(Keep in mind specs are only noticeable in lab conditions omni 4min up to omni 7 message me and I can tell you what I’m currently getting time)
Blemishes: Tubes may have a couple of very small blemishes nothing will be bad or distracting and that includes no emission points or Z1 & Z2blemishes I can get a picture of your specific tube before I ship it out if requested. Green phosphor tubes.
Size: 6.29x2.2x2.99in / 160x56x76mm
FOV: 40 degrees
Magnification: 1x
Weight: 379.21g/0.83lb (no battery)
Battery type: 1x Cr123a
Run time: 75 hours
Auto brightness control: Yes
Bright light cut off: Yes
Gain: Automatic
Diopter adjustment: +5 / -5 degrees
IR Illuminator: Yes
Focus range: 9.8in / 0.25m to infinity
Eye relief distance: 25mm (degree of deviation if your nearsighted or farsighted)
Focus type: manual
Storage: Hard or soft case default is the soft case.
Parts I buy for the build:
- M2021 Monocular housing
- 1x MX-10130 image intensifier tube
- 1x PA12 MFJ 3D printed adapter ring for image inverter
- soldering material
- positive and negative Wires
Please keep in mind that this is a pre order. I buy parts on an order to order basis and it may take up to 15 days to arrive to you. I Will Keep In contact With You throughout the build Process.
Mounting options:
All new units will come with a standard tripod mount tapped into one of the mini mounts which allows any standard mount. You will still be able to use the OEM mini rail mounts. Mini rail mounts listed below:
Mini rail Mounting options:
(Uses a Flir/mum-14 style mount)
-Nightwatch 3 Monocular FLIR Breach Folding helmet mount (best if you like running your NV sucked in to your eye) (dovetail)
- Armasight by flir swing arm #172 (dovetail)
Thank you for your time, Please reach out with any questions! ,680 shipped if pre paid through Paypal message for details
Not accepting returns at this time, I can offer a separate repair service if needed.
ITAR restrictions apply will not ship outside the lower 48 states of the U.S.A.