U-Weld-It Custom Steel Driveshaft Kit, 1310 Series, 2-1/2 Inch OD

Description

2-1/2-inch OD 1020 DOM tubing with rear tube yoke welded in place, Tubing length is 49 Inches for a maximum length of 53 1/2 inches center to center of universal joints, Includes 1310 universal joints (rear preinstalled), GM 27-spline slip yoke included for popular GM automatic and manual transmissions, Can be cut and welded by end user, or finished by your local driveshaft shop with your measurements
U-Weld-It Custom Steel Driveshaft Kit, 1310 Series, 2-1/2 Inch OD
Sku # 919251310
Mfr. Part # 919251310
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Notes
Fitment Application for Included Transmission Slip Yoke
• GM 27-spline, 1.5-inch OD Seal: Fits TH350, Aluminum Power Glide, 700R4, 200-4R, 4L60, 4L60E, 4L65E, 4L70E, Muncie M20 & M21, Saginaw 3 & 4-speed, T-5, T-10, T-56
Info
2-1/2-inch OD 1020 DOM tubing with a 0.083-inch wall thickness
Tubing length is 49 Inches and includes rear tube yolk welded on
Maximum length as shipped is 53 1/2-inches center-to-center of U-joints
Perfect for street rods, muscle, and kit cars up to 400 HP
Includes GM 27-spline slip yoke for popular GM transmissions
Includes 1310 universal joints front and rear (rear preinstalled)
Includes front tube yoke to be welded on by end user
Driveshaft tube can be cut easily with chop saw or band saw
Driveshaft
MUST
be balanced before on-road use
A Ready to Finish Driveshaft Right to Your Door
We have all been there. You just spent the weekend with a few friends dropping in that hot V-8 and your transmission of choice into your project’s rolling chassis. What is next? Connecting all that performance to your rear axle via a driveshaft.
However, your existing driveshaft (if you even have one) is likely 50 years old or is no longer correct for the new transmission and/or rear axle you have upgraded to. What to do? In the past you probably would have trailered your project to a driveshaft shop, dropped it off to have a custom driveshaft made, and picked it up several days later with a shiny new driveshaft installed.
While this certainly works, we know not everyone has a car trailer and something suitable to pull it with. Not to mention the thought of leaving your baby at some shop where it could possibly be damaged. Now, thanks to Speedway Motors’ new line of U-Weld-It steel drive shaft kits, you can assemble your project’s driveshaft at home with nothing more than a saw and a MIG welder. How much easier can it be than that?
Built with Steel for Strength and to Save You Money
There are a lot of great materials to make super strong driveshafts capable of high horsepower and we are often asked about an aluminum driveshaft vs carbon fiber. But we many of our customers are going to be running a basic crate engine or mild custom build of 400 HP or less, and for the capability and value a steel driveshaft vs aluminum is the best answer.
Our driveshafts begin as 49-inch lengths of “driveshaft quality” 2-1/2-inch OD 1020 DOM tubing. We weld on the rear tube yoke and fit the rear 1310 universal joint in place so all you must do is determine the correct overall length your project vehicle needs, cut the tubing to length, weld on the front tube yoke, and finish the driveshaft with the included 1310 front U-joint and slip yoke pieces. Even if you do not have everything you need to finish the driveshaft yourself you will still be steps ahead having a local driveshaft shop finish weld the front tube yoke and balance the shaft for you.
The Perfect Alternative
These U-Weld-It kits bridge the gap between expensive pre-finished driveshafts and having to deal with dragging your project car to a driveshaft shop. Now you can handle most of the measuring, labor, and assembly right in your own garage. Our 1310 universal joint model covers a large majority of drivetrain combinations out there, but if your application uses a 1350 series universal joint then you will want to look at our 2-1/2-inch U-Weld-It 1350 Driveshaft Kit and if you are planning more horsepower, our 3-inch U-Weld-It Driveshaft kit will handle up to 600 horsepower. Order your U-Weld-It steel driveshaft kit today and keep your custom driveshaft cost in check!
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Sold in Quantity
Each
Spline Count
27
Yoke U-Joint Series
1310
SFI Rated
No
Tube O.D.
2.50
Overall Diameter
2.50
Outside Diameter
2.50
Finish
Bare
Position
Rear
Differential Yoke Included
No
Transmission Yoke Included
Yes
Material Thickness
0.083
Spline OD
1.50
Shaft Length
49
Related Items / Suggested Parts
Ford 9 Inch 1310-Series Short/Small Pinion Yoke, 28-Spline
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.